When things go wrong with current isolation methods

Understanding the Safety Issue

Whenever the sun is shining, solar PV panels combine to generate lethal DC voltages that simply cannot be turned off.

The existing isolation system employed on most rooftop solar installations does nothing to stop the panels from combining and producing lethal DC voltages throughout the array.
The placement of a DC switch/isolator, as shown in figure 1 (whether placed on the roof, next to the inverter or both), will still allow the generation of lethal accumulated DC voltage throughout the panels and associated wiring, highlighted in red. As a consequence, these installations are a continual source of danger for maintenance and emergencies, including fire throughout the world.

When a Solar Safety ShutOFF is incorporated into your solar installation and turned off absolutely no combining of lethal DC Voltage occurs. The Solar Safety ShutOFF may be operated at the switchboard or as remote as the local substation. This feature is advantageous in a storm, flood, bushfire or even maintaining the electricity grid (stopping back feeding inverters)

When things go wrong with current isolation methods

To provide sufficient energy from solar panels to inverters with minimum losses increased voltages have been required for the generation of solar installations. For the Australian domestic market, a cap of 600VDC was introduced. Unfortunately, all forms of isolation have focussed on switching the combined output of the panels leaving the issue of lethal DC potential throughout the entire solar installation, even when all isolators are off. Because a solar array continues to combine panels and generate electricity whenever the sun is shining, all components are subject to continuous DC potential. If damaged, this solar generator may cause instant combustion at any point in the solar installation. More alarming is that in many cases the Fire Brigade have needed to implement extra precautions to extinguish roof fires where solar panels are installed – for fear they may receive a lethal electric shock – whether the panels were the cause of the fire or not.

Unprotected solar arrays accumulate and produce lethal levels of DC voltage increasing risk to homeowners, emergency service personnel and anyone accessing the roof area for general maintenance of the solar panels or roof area (cleaning gutters etc).

Damaged panels, wiring, inverters or dc isolators can cause fire due to the continuous power feed from solar panels.

UL Report Findings
Some findings provided by Underwriters Laboratories:
* Turning off an array is not as simple as opening a disconnect switch. Unlike a typical electrical or gas utility, on a PV array, there is no single point of disconnect.
* Tarps offer varying degrees of effectiveness to interrupt the generation of power from a PV array. Also, firefighting foam should not be relied upon to block light.
* PV systems are capable of producing electrical power sufficient to cause a lock-on hazard.
* Severely damaged PV arrays are capable of producing hazardous conditions ranging from perception to electrocution. Damage to the array may result in the creation of new and unexpected circuit paths.
* Damage to modules from tools may result in both electrical and fire hazards.
* Severing of conductors in both metal and plastic conduit results in electrical and fire hazards. Care must be exercised during ventilation and overhaul.

For more information please read UL Report findings: PV-FF_SafetyFinalReport.pdf

The Solution to rooftop solar panel fires

The Solar Safety ShutOFF may be added to any new or existing solar installation and provides true safety for any solar installation. The Solar Safety ShutOFF can be installed on homes, farm sheds, schools and commercial buildings and can be easily operated by home owners, emergency services personnel, tradespeople and roof maintenance personnel.
When the Solar Safety ShutOFF is fitted to your home, anyone may stop the generation of electricity of the solar panels simply by following the standard solar shutdown procedure located at the meter box. In an emergency, when access to the meter box is limited the entire solar array may be deactivated, removing all lethal DC voltages just by disconnecting the incoming power at the house, the street or the nearest substation. This then provides a SAFE environment for all emergency personnel, tradespeople and you to access the solar PV system and roof knowing that NO lethal DC voltages are being generated anywhere in your solar installation including the solar panels and associated wiring.

The Solar Safety ShutOFF is the first step in resolving the safety issues accompanied with solar installations by providing the only air gap solution to shutting down an entire solar installation just by disconnecting the incoming grid supply. Solar Safety ShutOFF provides the:
* Ability to switch off any solar generator both locally and remotely, providing a safe environment for anyone accessing a roof.
* Does not place operator at risk if solar array is damaged or the roof is electrified.
* Utilises the latest air gap isolation technologies providing up to 4mm air gap in less than 5 milliseconds.
* Provides true module level shut down isolation.
* When shut off, it leaves zero DC voltage circulating anywhere in system.
* Ability to clearly indicate safe solar panel isolation via existing inverter.
* Ability to switch off when a predetermined temperature has been reached (if heat is detected from an internal or external fire the entire system will safely shut down).
* Ability to shut down solar generation independent from the solar panels.
* Prevents solar panels back feeding into the electricity grid.
* Allows emergency services an immediate and unrestricted path to attack a fire or emergency situation rather than lose precious time performing risk assessments or not be willing to go on the roof due to increased risk of electric shock.
* Electricians would be able to work on the array and change faulty components knowing that NO lethal voltage can be generated.
* Anyone would have safe access to work on or just near the array without fear of finding themselves in a hazardous situation caused by an unknown fault or damage to the array.
* Prevents potential for electric shock when cleaning solar panels.
* Is compatible with Arc Detection Units which can provide 24/7 Safety monitoring and control.
* Can be installed on any new or existing system.
* Cost effective and safe.

For more information visit www.remotesolarisolator.com

Remote Solar Isolator is the most technologically advanced safety system available for solar generation

Remote Solar Isolator

The Remote Solar Isolator is the most technologically advanced safety system available for solar generation.

The Remote Solar Isolator is designed to integrate seamlessly into any solar array without affecting its performance or appearance. It splits strings of solar panels to the safety of Extra Low Voltage removing lethal d.c. voltages generated by both domestic and commercial solar installations. This is of utmost importance during an emergency and is recommended by the latest Australian Standards as a safe procedure for maintenance.

The Remote Solar Isolator has been tested and fully complies with Australian / New Zealand Standards (AS/NZ 3100:2009 ; AS/NZ 61000.6.3:2007 C-Tick mark) and exceeds the latest NEC 690.12 safety specifications by providing instant module level shutdown capability.

* Provides a single source solution that exceeds requirements for compliance of NEC 690.12.

* Uses the latest air gap isolation techniques providing up to 8mm air gap in less than 5 milliseconds
Provides true instantaneous module level shut down isolation.

* Removes lethal d.c. Voltages on any solar array providing a safe environment for all

* Automatically shuts down if it detects heat from a fire
Prevents solar panels back feeding into the grid.

* Allows emergency services an immediate and unrestricted path to attack a fire or emergency situation rather than lose precious time performing risk assessments or not be willing to go on the roof from concern of electric shock.

* Electricians would be able to work on the array and change faulty solar panels or cables knowing that NO dangerous or lethal voltage can be generated.

* Anyone would have safe access to work on or just near the array without fear of finding themselves in a hazardous situation caused by a hidden or unknown fault or damage to the array.

* Prevents potential for electric shock when cleaning solar panels with water.

When an Remote Solar Isolator is fitted to your home, anyone may stop the generation of electricity of the solar panels simply by following the standard solar shutdown procedure. In an emergency, when access to the meter box is limited the entire solar array may be deactivated and reduced to Extra Low Voltage just by disconnecting the incoming power at the house, the street or the nearest substation. This then provides a SAFE environment for all emergency personnel, tradespeople and you to access the solar PV system and roof knowing that NO lethal voltages are being generated anywhere in your solar installation including all wiring between the panels.

For more information please visit our website remotesolarisolator.com

Remote Solar Isolator crosses the North Atlantic

A global solar safety solution
By John Burfoot

Remote Solar Isolator™ is proud to welcome FireSafe Solar LLC as exclusive distributors in the United States of America.

Solar safety concerns are not unique to Australian residents and commercial owner/operators. Nations from both developed and semi-developed regions have adopted solar power as an affordable and accessible energy alternative. The risks, however, are beginning to emerge and in some parts of the world changes are being made and laws are being passed to address this.

Solar installation methods have changed little over the last 15 years since solar power first emerged on the commercial and residential scene. Over this time we have listened to the safety concerns of fire fighters and other emergency services personnel around the world, particularly with roof-mounted panels that account for the majority of solar installations. These solar arrays not only made it difficult to navigate around their flat, slippery surfaces, they also became an electrical hazard, as every array was in fact a lethal power generator that could never be turned off.

Remote Solar Isolator™ and its growing list of Accredited Installers have been promoting and lobbying for solar safety in Australia ever since Remote Solar Isolator won the 2012 Innovative Product of the Year award by the MEA and ECA1. This created a ground swell of awareness as home and commercial property owners began to take the issue of solar safety more seriously. But it wasn’t until September 2013 at the Dietz & Watson warehouse fire in Delanco, USA, where the world stopped to take a serious look at the real issues and the consequences of un-isolated PV solar installations.

The enormous scale of the warehouse fire and the impact that it had on solar safety headlines around the world, led to change at a political level earlier this year, with the passing of a bill in New Jersey that now requires an external shut-off mechanism as well as a method of identifying premises that have such devices. (For further information read http://cliffviewpilot.com/solar-panel-protections-bill-for-nj-firefighters-becomes-law/.)

The Remote Solar Isolator™ is designed to isolate portions of the solar array to a safe operating level known by the industry as Extra Low Voltage. Activation can be performed remotely at the fuse box, sub station or automatically by its internal thermal detection. Homes and businesses fitted with Remote Solar Isolator™ are also clearly labeled at the power source or fuse box. For more information go to www.remotesolarisolator.com.au

1 Masters Electricians Australia and Electrical Contractors Association

Safety switch for your roof – a lesson in hindsight

By John Burfoot

Remember the days before the safety switch became compulsory to install in new homes? At the time, we just relied on several standard circuit breakers in the fuse box to keep us safe. Provided we didn’t accidentally electrocute ourselves, it was a bullet we could easily dodge, and a price we didn’t have to pay. Or was it?

Before long, and after a string of tragic deaths, the safety switch became a mandatory safety device to prevent accidental electrocution. And it has since proven to be very successful in saving lives – I know, because it recently saved mine!

The reality is that no one plans to give themselves a potentially lethal electric shock when carrying out a home remedy on the extension cord, or on the outdoor light that ‘just’ needs a couple of wires connected to the mains. Even ‘just’ changing a light bulb has served up plenty of unsuspecting jolts over the years.

Nowadays, the decision to install a safety switch for the home fuse box has become a ‘no-brainer’. However, a new problem has recently emerged. Many homeowners are at risk to an additional lethal Voltage electrical power supply in their home – the solar array on their roof.

In fact, the average domestic solar installation can supply up to 600 volts d.c. That’s enough power to deliver a lethal electric shock. And since a solar array can never be turned off while the sun is shining, homeowners are at risk when they access the roof area. Think of all those homeowners who were rescued from their roofs during the recent Queensland floods.

Solar panels have also been reported to cause roof fires. More alarming is that in many cases the Fire Brigade have needed to implement extra precautions to extinguish roof fires where solar panels are installed – for fear they may receive a lethal electric shock – whether the panels were the cause of the fire or not.

And yet, many homeowners (and solar installers) still have not learnt their lesson of hindsight from the safety switch genesis...

“I’m careful, it won’t happen to me.”
“When do I need to get on the roof?”
“I won’t be affected by floods.”
“It’s not worth spending the money.”
“I can always call the Fire Brigade if there’s a fire on the roof.”
“My solar installer says it’s already safe.”

Already safe? The current method of switching off the d.c. isolator in an emergency does not shut down the ability of the solar panels to generate lethal Voltage. This only stops current flow to the inverter, and does nothing to ensure the safety on the roof.

Fortunately, there is now a safety switch for a solar array known as a Remote Solar Isolator™ (RSI). When an RSI is correctly fitted to a new or existing solar installation the homeowner can easily de-activate the array from combining its power and reduce it to the safety of Extra Low Voltage. This enables the homeowner to safely work near the array or the solar wiring from the roof. It also allows emergency personnel to gain safe access to your roof area.

For added control and safety, the RSI can be remotely activated from the local power station by disconnecting the incoming a.c. mains to the home. This may be particularly useful during flood emergencies, since homeowners would not be placing themselves or emergency personnel at further risk by gaining access to the roof area to escape rising water.

The RSI also comes fitted with a thermal detector in case of fire, which will stop the solar panels combining when a predetermined temperature is reached. This makes the roof area safe for fire fighters to focus on fighting the blaze, without fear of electrocution.

One thing becomes certain. Complacency around electrical safety levels is like a game of Russian roulette. It will only be a matter of time before a life is lost as a result of a solar array electrocution. Let us learn the lessons of the past to anticipate the pitfalls of the future, and eliminate those areas of risk we actually do have control over.

Like the safety switch for your home, the Remote Solar Isolator™ is a safety switch for your solar installation on your roof, and an inexpensive solution for those unexpected events.

Aussie invention the solution to potential risks associated with PV solar

With so many homeowners still unclear about the potential risks associated with PV solar installations, John Burfoot reports on the lethal d.c. voltage concerns and looks at the Remote Solar Isolator™ RSIA2/ELV solar safety system, winner of the electrical industry’s Innovative Product of the Year 2012.

The Remote Solar Isolator™ design and functionality has always focused on making solar safe on any new or existing solar system.  The RSIA2/ELV makes solar safe by limiting any lethal generated solar voltage to the safety of Extra Low Voltage, as per Australian Standard 3000/20071.

Many homeowners with solar panels still rely on switching off the d.c. isolator on the roof to stop the current flow to the inverter. But that doesn’t shut down the ability of the solar panels to generate lethal voltage. What if you or maintenance personnel needed access to your roof? Creating an open circuit at the inverter will only stop current flow to the fuse box, and does nothing to ensure the safety on the roof.

Joe Hudson, Inventor and CEO of Remote Solar Isolator Pty Ltd says “Electricians are putting their lives at risk, and many of them aren’t aware of the issues and problems associated with solar panels. As soon as the sun shines on the array, you’re at risk of electrocution. We need to warn both the trade and the public of this problem.”

The electrical trades union released a warning to the trade about this very issue in its National Autumn edition, promoting Remote Solar Isolator™ as the obvious solution.

JB: How can we stop the potential lethal d.c. voltages?
JH: The problem is even when the standard solar shutdown procedure is followed, such as switching off power to the inverter, lethal voltages are still being generated throughout the solar panels. The contacts in the RSIA2/ELV are specifically designed to switch off the lethal d.c. voltages contained within a solar installation by not allowing panels to combine. When installed correctly, the Remote Solar Isolator™ can be activated by flicking a switch within the fuse box, or by remotely disconnecting the incoming grid mains from the local power station. This ensures that no one is at risk of electrocution on any solar installation. This is Smart, Safe and required.

JB: What about the d.c. isolator?
JH: The d.c. isolator used on solar arrays, which is required by Australian standards, falls short of addressing this issue and is not capable to switch d.c. under full load or stop the generation of lethal d.c voltages throughout the solar array. The issue of lethal voltage generation from solar arrays still exists when this d.c. isolator is switched off.

JB: How is the RSIA2/ELV safety system different?
JH: The Remote Solar Isolator™ is different in that it is rated to switch off under full load. Water ingress is not an issue because of its special mounting system. The contacts in a RSIA2/ELV have been tested and approved to switch under full load to UL508 and VDE0435. This test ensures that the contacts can switch full load for more than 10,000 cycles.
JB: How does the RSIA2/ELV help when there is a fire?
JH: If a fire occurs on a house roof the temperature usually reaches 1500-2000 degrees. The RSIA2/ELV has an inbuilt thermal detection unit, which will stop solar panels combining when this predetermined temperature has been reached. The area is then safe for fire fighters to focus on fighting the blaze without the fear of electrocution or wasting time conducting a risk assesement.

JB: We saw cases recently with the Queensland floods, where many residents had to access the roof to escape the rising water. How can the RSIA2/ELV help these homeowners and rescue personnel during such emergencies?
JH: It is common practice in these situations for the local power station to remotely disconnect the incoming a.c. mains to affected homes. When this occurs, the RSIA2/ELV stops the solar panels from combining lethal power, making it safe for homeowners or rescue personnel to access the roof area.

Reference
1 http://infostore.saiglobal.com/store/Details.aspx?ProductID=366926

Other material
http://www.wiringrules.standards.org.au/LinkClick.aspx?fileticket=4UaAcwXiLME%3d&tabid=380
http://www.youtube.com/watch?feature=player_embedded&v=5nHemMZhuU4

Read the article at http://ecogeneration.com.au/news/solar_safety_first_with_a_remote_isolator/075439/

Solar Quality Control

Solar Quality Control: Is there a developing problem with the world?s solar panels? http://www.renewableenergymagazine.com/article/solar-quality-control-is-there-a-developing-20130610

Risks of faulty Solar PV systems

When a Remote Solar Isolator is fitted to your home, anyone may stop the generation of electricity of the solar panels simply by flicking a switch at the meter board or in an emergency, by remotely disconnecting power at the nearest substation. This then provides a SAFE environment for all emergency personnel, tradespeople and you to access the solar PV system and roof knowing that NO lethal voltages are being generated.

Current shut-down procedures DO NOT isolate the solar panels to a safe "Extra Low Voltage they only stop the flow of electricity from the inverter to the meter board. This leaves the solar panels and associated wires live with lethal d.c. Voltage.

Emergency personal around the world are voicing their concerns after experiencing the risks first hand.

---

"The main hazard to be aware of is that the system can remain live even after it has been isolated, presenting the potential for an electric shock."

Fire ravages Organic Valley Headquarters

---

As a result in property damage, insurance companies are becoming aware of this problem and are likely to take steps to reduce their liabilities. Take the necessary steps and protect your property by installing a Remote Solar Isolator and make solar safe.

Read the article Defective PV panel failures could trigger insurance lawsuits.

Solar panels burn at school fire

Solar panels are the likely cause of a fire at Webster Groves High School on Saturday, May 18, 2013. Smart thinking and many fire units had the blaze under control within 15 minutes.

Solar panel fires are becoming more common. The safest thing you can do is to isolate the panels in emergencies especially fires to reduce the risks of electrocution.  

Watch News Channel 5 video of the incident: http://www.ksdk.com/video/default.aspx?bctid=2392768324001


watch more videos at http://remotesolarisolator.com.au/video

Solar Panel Shocks - a concern of the Fire Service

The fire service again voices their concerns of the risk of potentially lethal DC voltages circulating around all power generating solar panels and associated electrical wiring.

When a  Remote Solar Isolator is fitted to your home, anyone may stop the generation of electricity of the solar panels simply by flicking a switch at the meter board or in an emergency, by remotely disconnecting power at the nearest substation. This then provides a SAFE environment for all emergency personnel, tradespeople and you to access the solar PV system and roof knowing that NO lethal voltages are being generated.

Read the article: Unease From Fire Service Over Potential Shocks From Solar Panels

Solar panels shock concerns

“The main hazard to be aware of is that the system can remain live even after it has been isolated, presenting the potential for an electric shock.”

Don’t wait for an accident to happen. Take charge and install a Remote Solar Isolator and protect everyone from the possibility of electrocution. The Remote Solar Isolator provides unrivalled protection to homes during fire, flood, maintenance or storm.

Read the article Fire service raises solar panels shock concerns

New Remote Solar Isolator - Extra Low Voltage

The RSIA2ELV is designed to reduce to a safe level the amount of lethal d.c. voltages on any solar installation. It is easily installed on any new or retrofitted to any existing system. The RSI is installed between the outer panels of each string using only 8 connection points per RSI without modifying any of the existing wiring between the panels and the switchboard. The RSIA2ELV limits any solar voltage to Extra Low Voltage as per Australian Standard 3000/2007. This enables safe access for emergency services, maintenance personal and the home owners to the roof and associated solar wiring.

Form more information please visit http://remotesolarisolator.com.au/

Isolating the danger

The growing concern surrounding solar photovoltaic (PV) systems is that there is no safe way to isolate rooftop panels and stop the generation of potentially lethal Direct Current (DC) voltages. 

When a RSI is fitted to your home, anyone may stop the generation of electricity of the solar panels simply by flicking a switch at the meter board or in an emergency, by remotely disconnecting power at the nearest substation. This then provides a SAFE environment for all emergency personnel, tradespeople and you to access the solar PV system and roof knowing that NO lethal voltages are being generated.

Joe Hudson, CEO of Remote Solar Isolator explains the real risk of electrocution and how installing a Remote Solar Isolator can overcome this risk. Read the article posted on Electrical Connection.

Isolating the danger http://www.electricalconnection.com.au/article/10017629/isolating-danger

For more information visit http://www.remotesolarisolator.com.au

Rooftop solar panels put fire fighters at risk, chief says

It’s a fact that solar panels installed on buildings can never be completely switched off and continues to generate electricity whenever the sun is shining. Even by turning off all associated solar switches, electricity generated by the panels continues to be produced at lethal voltages. This can lead to complications if there is a need to isolate the panels, such as in the case of cleaning, maintenance or more seriously, for building fires, floods or storm damage. Understandably, emergency services are reluctant to come into contact with, or spray water onto a dangerous and potentially life-threatening source of electricity. The Remote Solar Isolator (RSI) is a unique Australian designed and manufactured product which provides safe isolation of the entire solar panel system, allowing homeowners, emergency services and maintenance personnel full unrestricted access to the roof and associated solar wiring. RSI is tested and compliant to AS/NZS: 3100 and has full C-tick approval.

Rooftop solar panels hinder fire fighters’ efforts to ventilate blazes and put their safety at risk, says Central Huron’s fire chief. Read the article posted in http://huron.bulletnewscanada.ca.

Rooftop fire closes Long Beach Wal-Mart

Rooftop fire closes Long Beach Wal-Mart http://www.contracostatimes.com/ci_21297587

National Solar Safety Warning