Remote Solar Isolator is the most technologically advanced safety system available for solar generation

Remote Solar Isolator

The Remote Solar Isolator is the most technologically advanced safety system available for solar generation.

The Remote Solar Isolator is designed to integrate seamlessly into any solar array without affecting its performance or appearance. It splits strings of solar panels to the safety of Extra Low Voltage removing lethal d.c. voltages generated by both domestic and commercial solar installations. This is of utmost importance during an emergency and is recommended by the latest Australian Standards as a safe procedure for maintenance.

The Remote Solar Isolator has been tested and fully complies with Australian / New Zealand Standards (AS/NZ 3100:2009 ; AS/NZ 61000.6.3:2007 C-Tick mark) and exceeds the latest NEC 690.12 safety specifications by providing instant module level shutdown capability.

* Provides a single source solution that exceeds requirements for compliance of NEC 690.12.

* Uses the latest air gap isolation techniques providing up to 8mm air gap in less than 5 milliseconds
Provides true instantaneous module level shut down isolation.

* Removes lethal d.c. Voltages on any solar array providing a safe environment for all

* Automatically shuts down if it detects heat from a fire
Prevents solar panels back feeding into the grid.

* Allows emergency services an immediate and unrestricted path to attack a fire or emergency situation rather than lose precious time performing risk assessments or not be willing to go on the roof from concern of electric shock.

* Electricians would be able to work on the array and change faulty solar panels or cables knowing that NO dangerous or lethal voltage can be generated.

* Anyone would have safe access to work on or just near the array without fear of finding themselves in a hazardous situation caused by a hidden or unknown fault or damage to the array.

* Prevents potential for electric shock when cleaning solar panels with water.

When an Remote Solar Isolator is fitted to your home, anyone may stop the generation of electricity of the solar panels simply by following the standard solar shutdown procedure. In an emergency, when access to the meter box is limited the entire solar array may be deactivated and reduced to Extra Low Voltage just by disconnecting the incoming power at the house, the street or the nearest substation. This then provides a SAFE environment for all emergency personnel, tradespeople and you to access the solar PV system and roof knowing that NO lethal voltages are being generated anywhere in your solar installation including all wiring between the panels.

For more information please visit our website remotesolarisolator.com